Best Manufacturing Courses

Find the best online Manufacturing Courses for you. The courses are sorted based on popularity and user ratings. We do not allow paid placements in any of our rankings. We also have a separate page listing only the Free Manufacturing Courses.

Fusion 360 Circuit Design and PCB Manufacturing

Learn how to create circuit design and preparing a PCB for manufacturing plus getting a 3D view of your circuit

Created by Educational Engineering Team - Team of skilled Engineers Sharing Knowledge with the World


Students: 13333, Price: $89.99

Students: 13333, Price:  Paid

In this course, you will learn how to create circuit schematics in no time using a library that has tons of electronic elements available free for you to use in the fusion 360 software.

Welcome to this course.

This course will take you from zero experience in  Circuit design and simulation and PCB fabrication to a professional who can build Professional Circuits, and turn them into production-ready products.

This is a state of the art software that provide you with a complete experience to draw your schematic and control every single detail on each electronic part, it allows you to check your schematic for design errors before moving forward to the PCB manufacturing. Plus autoroute your PCB into multiplayer mode.

You’ll also get a 3D visualization of your circuit that you can easily use in creating a 3D case for your PC by using the very same software which is  fusion 360.

Stop using old school software that limits your possibility and start using one of the most trending software out there provided by Autodesk company, kickstart your freelancing career in 3D design, circuit design, and simulation plus PCB manufacturing.

This software provides you with CAD/CAM  and simulation capabilities to help you achieve your full potential and test your circuit before moving to the PCB permanent prototype.

Fusion 360 Electronics workspace expands the capabilities of Fusion 360 to create PROFESSIONAL electronic designs.

Introduction to Lean for Service and Manufacturing

Applying Lean in Service and Manufacturing Organizations

Created by Sorin Dumitrascu - Management trainer


Students: 7409, Price: $49.99

Students: 7409, Price:  Paid

The Introduction to Lean for Service and Manufacturing course is part of the Lean for Business Organizations program which includes a total of 6 sections:

1. Introduction to Lean for Service and Manufacturing,

2. Using Lean for Perfection and Quality,

3. Lean Tools and Techniques for Flow and Pull,

4. Reducing Waste and Streamlining Value Flow Using Lean,

5. Value Stream Mapping in Lean Business, and

6. Applying Lean in Service and Manufacturing Organizations

Introduction to Lean for Service and Manufacturing

Using inefficient procedures is like digging a 200-foot wide hole for a 100-foot wide house. You'll have wasted a great deal of effort on something you don't really need. Your organization must make shrewd investments in its precious time, money, and effort. You need flexible, intelligent strategies to evolve and prosper in a competitive global market.

Lean is a methodology that incorporates a powerful set of tools and techniques designed to maximize customer value while constantly working to reduce waste. It focuses on improving overall efficiency, quality, and customer satisfaction.

Because of its ability to improve customer satisfaction and deliver bottom-line financial gains, Lean is a preferred strategic choice for many organizations.

This course introduces you to the basic principles of Lean, which will help you create more efficient processes and get you on the road to successful operations management.

This course also outlines the five-step process for implementing Lean. By learning how to implement Lean in your organization, you can reduce the costs of developing your company's product, increase production efficiency, and improve safety, quality, and performance levels.

Finally, the course explains how Lean integrates with the Six Sigma production management system. Using this hybrid approach enables you to minimize process and product defects, and to identify and resolve pervasive problems.

That’s it! Now go ahead and push that “Take this course” button and see you on the inside!

Essential Lean Manufacturing for Management Consultants

Practical guide how to improve production and operations in a firm and analyze potential savings in Excel

Created by Asen Gyczew - Expert in performance improvement, turnaround and startups


Students: 6250, Price: $89.99

Students: 6250, Price:  Paid

What is the aim of this course?


This course will help you drastically improve your knowledge and skills in optimizing production, and operations  of any company through a series of practical cases. It is designed for people who want to become consultants, business analysts or have to run and optimize production on a daily bases. In the course you will learn 3 things:


  1. How to understand any production or operational activities


  2. How to optimize the production and operations in order to get more things done, cheaper at higher quality with less resources using elements from lean manufacturing, theory constraints


  3. Where to look for savings and improvements, how to calculate potential savings in Excel and implement them


I will concentrate here on lean manufacturing techniques as well as things related to theory of constraints (removing bottlenecks and critical chain).


The course is based on my 12 years of experience as a consultant in top consulting companies and as a Board Member responsible for strategy, improvement and turn-arounds in biggest companies from FMCG, SMG, B2B sector that I worked for. On many occasions I had to optimize the whole production and operational side of the businesses I was responsible for.  On the basis of what you will find in this course I have trained over 100 consultants, business analysts and managers who now are Production Directors, Operational  Directors, COO, Investment Directors, Directors in Consulting Companies, Board Members etc. On top of that my courses on Udemy have already been taken by more than 45 000 students. The course you will take has been taken also by people from EY, Walmart, Booz Allen Hamilton, Dell, Walgreens and many more as a part of Udemy for Business.   

I teach through cases so most of the lectures are case studies showing some business problems solved in Excel. There will be also overview of main techniques used in optimizing and running production. To every lecture you will find attached  (in additional resources) the Excels shown in the Lecture so as a part of this course you will also get a library of ready-made analyses that can, with certain modification, be applied by you in your work.


Why I decided to create this course?


Most consultants and business analysts are terrible at organizing operational issues. They treat the operations, especially production, as a black-box and try to avoid it at any cost. Technical things overwhelm them and they shy away from them. This approach is not the right one as you find elements that resemble production everywhere. In hospitals most procedures performed are very similar to production issues. The same goes for running a call center, a chain of restaurants, a logistic company or a firm delivering specialized services. Everywhere you have operations that you can optimize by using techniques that I will show in this course.  Production influence heavily other areas especially sales and marketing. Therefore, it is a good idea to have at least a general knowledge in production. The funny things is that to be good at production you do not even have to be technical at all. I have not finished any technical school and I am pretty good in finding significant improvements in production. One of the best Production Directors I know has finished Pedagogical Studies.


To sum it up, I believe that if you want to build or to find improvements in any business you should master techniques related to optimizing production. That is why I highly recommend this course not only to consultants or business analyst that have to advice their customer but also to owners, founders  of businesses as well as production directors.


In what way will you benefit from this course?


The course is a practical, step by step guide loaded with tones of analyses, tricks, hints that will significantly improve the speed with which you find and analyze production. There is little theory – mainly examples, a lot of tips from my own experience as well as other notable examples worth mentioning. Our intention is that thanks to the course you will know:


  1. How to understand production


  2. How to optimize it


  3. Where to look for savings and improvement in production


  4. How to calculate the impact of proposed changes in Excel


You can also ask me any question either through the discussion mode or by messaging me directly.


How the course is organized?


The course is divided currently in 6 sections and will be adding new section to address other important issues. Currently you will find the following sections:


  • Introduction.      We begin with little      intro into the course as well as some general info on production


  • Basic      methods of improving production. In the second section I will discuss the basic techniques that you      can use to optimize your business. Here you will find the potential low      hanging fruits. Here I will show you basic lean manufacturing methods as      well as elements of theory of constraints. You will also see how to      calculate potential savings in Excel


  • Continuous      Flow. The ideal in      production is the so called continuous flow -every go smoothly and fast.      Products are being produced fast and cheap. In this section I will tell      you how to achieve it. This is one of the pivotal element of lean      manufacturing


  • Advanced      methods of improving production. In section 4 I will continuous with more advanced way in which you      can improve your production such as: SMED, TPM, Automation, Critical Chain


  • Capacity      management. Apart from      optimizing the production you have to think strategically and know when      you have to add new capacity / factory. In this section I will show you      how you can do that


  • Production      planning. Production      planning is the brain of production. If you get this wrong the other      things won’t matter. In this section I will show you some ways in which      you can analyze and improve production planning

I will be adding new sections and lectures in the coming months




You will be able also to download many additional resources


  1. Excels with analyses shown in the course


  2. Presentation of slides show in the course


  3. Links to additional presentations and movies


  4. Links to books worth reading

Siemens PLM – Teamcenter Basics

Introduction to Siemens PLM Teamcenter Solutions with focused on Design and Manufacturing activities.

Created by Naresh Kumar Yerrabachu - PLM Solutions Expert


Students: 5293, Price: Free

Students: 5293, Price:  Free

PLM - Produt Lifecycle Management - is a very strategic solution for Design and Manufacturing Organizations, There are many PLM solutions in market, out of which Siemens PLM Teamcenter is very popular across industry verticals. Any Design and manufacturing students or professionals who are interested to explore Siemens PLM Teamcenter solutions, here is the basic course for you. Explore and Enjoy the Siemens PLM Teamcenter course.



Created by John Devitry - Mechanical Engineering and 3D Design


Students: 3670, Price: Free

Students: 3670, Price:  Free

INSIGHTS & CHALLENGES WITH BRINGING A NEW PRODUCT TO MARKET - Over the years I’ve had numerous students come to me & want to talk about a new product idea they have but aren't sure how to get started. Now instead of giving you a classroom lecture on product development and the steps involved, I'm going to share with you a personal experience, probably with more examples of what not to do than what to do.

Manufacturing Operations – Planning, Management and Control

Cutting-Edge Production Management Methods That Will Help You Outperform the Competition

Created by Operational Excellence Training - Industrial Management Courses


Students: 3280, Price: $99.99

Students: 3280, Price:  Paid

Is your manufacturing business strategically positioned to outpace its competitors? The effective streamlining of your company’s approach to both planning and control is the key to cutting costs, increasing efficiency, and staying one giant step ahead of the competition. In this fast-moving industry where customer demands rule all, regularly meeting and exceeding those demands is vital for success.   

Based on the instructor’s comprehensive and hands-on operational experience, this course will teach you the basic principles and best practices behind production management, including essential concepts like decision making, systems design and capacity, facilities location and layout, demand forecasting, resource and materials planning, capacity management and production control, and materials and inventory strategies. 

Upon completion of this course, manufacturing professionals and business owners alike will have the necessary practical skills to improve both their personal performance and the overall proficiency of their company’s manufacturing operations. This course will provide you with the knowledge, analysis, and advanced practices your business needs to stay current and competitive as an integral part of the supply chain industry. It will also show you how to consistently meet customer requirements, and how to meet those crucial obligations with significantly greater speed and accuracy than the competition.

Creating a Bald Cap – A Free Demonstration

Manufacture and apply your own custom bald cap with Australia's leading Cinemagraphic Makeup Academy

Created by AACM The Australian Academy of Cinemagraphic Makeup - AACM - The Australian Academy of Cinemagraphic Makeup


Students: 2708, Price: Free

Students: 2708, Price:  Free

This is a free course covering the manufacturing of a custom made bald cap.

Shannon McKean, makeup artist and trainer at the Australian Academy of Cinemagraphic Makeup, will guide you with tips and tricks from her 30 years of experience in the industry.  Watch and learn how to make a head template, manufacturing the bald cap, preparing your model, applying the bald cap, painting the bald cap and removing the bald cap. This course is ideal for anybody interested in special effects makeup.

For more detailed information on the application process, please refer to our Udemy page and the "Creating a Bald Cap" course.

Manufacturing Guide for Mechanical Product Development

Learn how everyday physical products are manufactured with no prior experience in engineering.

Created by Swapnil Patel - Mechanical Engineer


Students: 2425, Price: $89.99

Students: 2425, Price:  Paid

Welcome to the course that will explain Manufacturing from the very basics – “Manufacturing Guide for Product Development”. Whether you are an engineer, product developer, emerging entrepreneur, or simply an Android or Java Developer who is intrigued by the world of manufacturing, this course will provide skills that will help you in many aspects of your engineering or non-engineering career.

Gain Manufacturing Knowledge without Spending $60,000 in Colleges and Universities

  • Complete overview of modern manufacturing methods
  • Video links that demonstrate these manufacturing methods to understand them visually
  • All complex industrial processes explained in the easiest manner; No unnecessary technical terms and jargons
  • Connection between manufacturing and product development
  • Understanding of how everyday products are made like bottles, grocery bags, smartphone case, pipes, metal containers etc.

Course Summary

Sometimes, even engineers who spend 4 years of college learning theories do not know enough about manufacturing. I have spent countless hours learning manufacturing theories and just as many hours practising in the mechanical engineering industry. I have compiled all the juicy and interesting things in this Udemy course while leaving out unnecessary things so this course is all you need.

Unlike computer programming, manufacturing and mechanical engineering are hands-on fields. You need to visit machine shops and factories to see the actual physical processes in order to learn properly. But, I have manufacturing-related video links in this course that will allow you to learn everything without having to visit hot and dirty factories.

The best thing about this course is that it uses the simplest language and avoids all the technical and unnecessarily complicated wording so you can understand even the most complicated topics with ease. As long as you have passion to learn amazing things, YOU MUST TAKE THIS COURSE.

Contents and Overview

This course contains over 40 lectures, 2+ hours of contents, and a compilation of the best video demonstrations for each topic discussed.

I will cover these topics

  • Materials
  • Plastic Types
  • Concept Generation
  • Casting
  • Molding
  • Forming
  • Machining
  • Powder Processing
  • 3D Printing
  • Joining

By the time you complete this course, you will feel very accomplished and look at products around you differently depending on your profession. If you are in engineering, you will be able to make great prototypes for your design projects and have more hands-on skills compared to your other classmates. If you are not in engineering, you will develop a good eye for seeing things in terms of manufacturing. you will be able to see your smartphone or your window frames and think how they must have been made!

There is a lot to learn and you will have questions along the way. Feel free to post your questions and ideas onto the discussion board of this course and I will reply with an answer within 48 hours. I encourage students to participate as much as possible.

Watches: How to Design, Manufacture and Build a Brand

Go from Collector to a Watch Company Owner with this Practical Guide.

Created by Jahn Karsybaev - PMP, MS, Serial Entrepreneur | Educator


Students: 2259, Price: $24.99

Students: 2259, Price:  Paid

Have you always contemplated starting a business because your idea is not innovative enough, or lack of resources, or too much competition? Is your aspiration to turn your passion and hobby into a profitable business? Do you love watches and dream of having your own watch brand? If you answered Yes to all or any of these questions, then this course is a good start. By no means this course guarantees success, but what it does guarantee is equipping you with the valuable information and positioning you in a more advantageous position to become successful! 

Learn all the trade secrets directly from the source how to launch and operate a Watch Company with great success.

Students who sign up for this course will also receive (just email me at 

  • my other Udemy Course "Crowdfunding for Watches: Step-By-Step Guide to Get Funded " at 75% OFF
  • exclusive Discounts on Marketing Services from Top Blogs mentioned in this Course
  • Free Copy of My Book "How To Launch A Watch Company"

The Role of Materials in 3D Printing/Additive Manufacturing

(i) Definition of materials (ii) Attributes of materials (iii) 3D printing of materials (iv) Phase change & 3D printing

Created by Brando Okolo - Custodian of Materials in Additive Manufacturing


Students: 1635, Price: Free

Students: 1635, Price:  Free

This course draws the physical association between 3D printing and materials. It defines the nature of different kinds of materials as well as the attributes which makes them 3D printable. The role of phase transformation especially temperature driven transformation in 3D printed materials is treated at the fundamental level. This course presents a lot of research based instances of material behaviour under 3D printing conditions. Practice based data are also presented to reinforce the importance of materials know-how at the industrial level.

Introduction To Manufacturing Accounting

Direct, Indirect and SG&A Costs

Created by Barry Reeves - Performance Driven Business Professional


Students: 1619, Price: $19.99

Students: 1619, Price:  Paid

This course introduces the different expenses in manufacturing while creating a visual representation of each transaction. This allows each employee to understand how each business activity is accounted for in the accounting system.  This course also explains the variables that must be addressed to create strategies to budget costs in each major manufacturing accounting category. Lessons are reinforced with chapter quizzes and finally with a case study exercise.

Lean Manufacturing A-Z: Lean Operations Management

Lean Business Operations Management, Lean Process and Systems Improvement in Production and Industry. MBA style course

Created by Laurence Gartside MEng Cantab - Management Consultant and Coach


Students: 1125, Price: $19.99

Students: 1125, Price:  Paid

  • Master the tools and methodology of Lean and Kaizen to have and "impact" and "improve" your business operations - manufacturing, services, industrial operations and production.

  • Equip yourself to take a new leading role in your workplace - improving your processes, systems, business / organization.

  • Understand the fundamentals, then details of the most effective, proven improvement methodology ever.  The principles, tools and essential approaches to continuous improvement / kaizen in business systems, organization and design.

  • Become the Lean authority in your team on improving the operations systems in your business

This MBA style course on Lean Manufacturing prepares and empowers you to make a REAL difference. Turbo-charge your career, and your business performance, to the highest levels.

This course is for the new or aspiring manager, the ambitious engineer, high flying consultant, the hands-on planners and the practical business analysts.

Business operations come in all shapes and sizes with a host of unique challenges; but Lean, whilst first developed in manufacturing has successfully lasted the decades and bridged into transport, retail, healthcare, logistics, finance and service companies. Lean remains the heart of continuously improving businesses of all types to remain competitive, improving profitability, improving customer experience and customer satisfaction, reducing costs and improving delivery.

Without a solid grasp of Lean, no manager, junior or senior, can competently or confidently look to improve their business operations, the processes, systems and teams that make a business successful.

Take control of your career and equip yourself with a solid base in Lean Methodologies that you can practically use right now to unlock the potential of your business processes!

Course Sections:

1. Lean Fundamentals and Philosophy

2. Value and Waste

3. Inventory Management and Control

4. Tools of Lean

5. Quality Management

6. Flow

7. Scheduling and Production Planning for Lean

8. History of Lean

Course Extras

  • Downloadable Documents with summaries and exercises

  • Summary Test with 80 multiple choice questions to test and lock in your learnings

Take control! Boost your career and your business!  Join us today!

Full List of Course Sub Sections:

1. Fundamentals and Philosophy of Lean

  • Fundamentals of Lean

  • The 5 Principles of Lean

  • Lean is like an Orchestra

  • Muda, Muri & Mura

  • The 25 Characteristics of Lean

2. Value and Waste

  • Value and Waste - Introduction

  • Finding Customer Value - Kano

  • Process Mapping for Value

  • Value Timelines

  • Tea Shop VA/ NVA Exercise

  • Tea Shop Exercise - Debrief

  • The 8 Wastes of Lean : TIMWOODS

  • Other Types of Waste

  • Chasing Waste - Caution

3. Inventory Management

  • Inventory Introduction

  • What is Inventory?

  • Why do we Need Inventory?

  • Little's Law

  • Costs of Inventory

  • Rock-Boat Analogy

4. Tools of Lean

  • Tools - Introduction

  • 5S - Workplace Organization

  • SMED: Changeover and Cycletime Reduction

  • SMED Method: Gantt Chart

  • Value Stream Mapping (VSM)

  • Visual Management

  • Gemba

  • Gemba Walks

  • Standard Work

  • PDCA Improvement Cycle

  • A3 Reports

5. Quality

  • Quality - Introduction

  • Reducing Complexity

  • Reducing Mistakes

  • Reducing Variation

  • Six Sigma

  • Root Cause and 5 Whys

  • Jidoka - Autonomation

  • Poka-Yoke - Mistake Proofing

  • Total Productive Maintenance (TPM)

6. Flow

  • Flow - Introduction

  • What Stops Flow?

  • Reducing Variation in the System

  • Causes of Variation of Demand and Capacity

  • Demand Management - Introduction

  • External Demand Management

  • Internal Demand Management

  • Takt Time, Cycle Time & Lead Time

  • Takt Time

  • Cycle Time

  • Throughput and Lead Time

  • Takt Time, Cycle Time & Lead Time Summary

  • Small Batch Sizes

  • Batch Sizes and One Piece Flow

  • Local Efficiencies don't make an efficient system

7. Scheduling and Pull

  • Scheduling - Introduction

  • Lean Scheduling

  • Choosing Batch Sizes

  • Economic Batch Quantity / EOQ / EBQ

  • Every Product Every Interval ( EPEI )

  • Pull

  • Cake Shop Example - Pull vs Push

  • Production Pull in a Burger Shop

  • Kanban - Production Planning

  • Push vs Pull Approaches

  • Pull: Pros and Cons

  • Push Pull Combination

8. History of Lean

  • History of Lean - Introduction

  • History of Lean - Timeline

  • Toyota Production System (TPS)

How I designed, prototyped & manufactured my first product.

Take your idea from concept to creation! No design experience needed!

Created by Randy Ganacias - Inventor, Video Producer, Maker of things


Students: 1051, Price: $19.99

Students: 1051, Price:  Paid

Take your first idea to market and have fun creating it! Take a simplified approach to learn how to design, prototype and manufacture your first product. Learn how I made my first product in months and how you can too! You'll learn about all of the basic steps you need including:

  • Basic product sketching to move your idea from imagination to illustration.
  • Creating a "Design Kit" for prospective companies looking to license your product.
  • Learn 3D CAD using a free program and create parts and assemblies.
  • Learn about 3D printing, laser cutting and CNC machining services.
  • Find out where to get parts and supplies for free or with discounts.
  • Learn where manufacturers are and what they need from you to create your product.

This course can take a few weeks, a few months... even a few years depending on your idea. However long it will take, you'll gain tons of insight and experience along with numerous network opportunities... all around your first product. Take the steps to make your first of many!

Basic Good Manufacturing Practices (GMP)

Learn the good practices that applies to the pharmaceutical industry

Created by Ruben Alonso - Auditor de Calidad en Industria Farmacéutica


Students: 1029, Price: $24.99

Students: 1029, Price:  Paid

The compliance with GMP (Good Manufacturing Practices) standards is the decisive aspect for the production of high quality products. They are mandatory for all Pharmaceutical laboratories, thus health authorities performs inspection and audits in order to check the compliance. So, all employees must be aware and follow them all the time.

What you will learn during the course:

During this course, you will learn from the beginning the concepts that every employee from the pharmaceutical industry must know and comply with. 

Moreover, I will present the most important elements of a pharmaceutical system, the appropriate behaviors that must be followed and I will give details of the fundamental parts of the pharmaceutical industry.

What will you receive when enrolling into the course?

· Lifetime access to the course and future updates

· Personalized support and answer to all your questions and doubts

· Certificate in “Basic Good Manufacturing Practices” from Udemy - which you can include on your resume

· Money-back guarantee in the first 30 days - if you don't like the course you can request a 100% refund of your investment

· I will handle  supportive documentation for your knowledge and questionnaires for practice

So, at the end of this course you will have the basic knowledge of GMP's

See you on the course!

Lean Manufacturing made Easy – Introduction to Lean

Introduction to Lean is the Foundation you need to advance your career or company in Continuous Improvement

Created by Lean Strategies International LLC - Solutions that ignite your power


Students: 1013, Price: $19.99

Students: 1013, Price:  Paid

  Introduction to Lean is the perfect introductory course. It helps Students understand the foundational concepts of lean along with sharing key principles, tools and techniques. The course can be taken by an organization's entire workforce no matter what skill level the employee is currently at. 

In this course you will learn about the following topics:

  1. Overview of lean.
  2. Overview of waste.
  3. Lean culture.
  4. What problems are.
  5. Value streams.
  6. Details and general solutions associated with each form of waste.
  7. Kaizen.
  8. Gemba.
  9. Pull systems.
  10. What flow is.
  11. Takt time.
  12. Zero quality control.
  13. Root cause analysis.
  14. Key lean tools.
  15. Basic problem solving methodologies.

  Watch the free preview and enroll today!


Getting Started with Eagle CAD PCB design

Learn PCB Design with passion. Course may lead you to be an entrepreneur in Electronic board design & manufacturing unit

Created by Pradeep Raj - Training Head at Swarna Institute of Technology, Bangalore


Students: 980, Price: Free

Students: 980, Price:  Free

PCB Design and electronics circuit are basements for all type of electronics products. PCBs are derived from the analog and digital circuits which are prepared according to the application required. Printed circuit boards are the main pillars of the Electronics world. Every Electronics products has PCB inside it, from consumer gadgets like computers, smart phones and gaming consoles to industry and even high-tech products.

Required eligibility:

  • Diploma in Electrical or Electronics & Communication.

  • BE/BTech. in Electrical or Electronics & Communication.

  • BSc/MSc in Electronics & Communication.

  • ME/MTech. (E&CE) in Communication.

PCB Design Course Content is given below in brief:

Schematic Design:

  • Basic Electronics theory.

  • Basics of Circuit designing.

  • Schematic design preparation.

  • Schematic part editing and creation.

  • Net list and Net class creation.

  • Bill Of Material generation (BOM).

  • Electrical Rule Checking.

Footprint Creation:

  • Through hole footprint creation.

  • Surface Mount Device footprint creation.

  • BGA/PGA footprint creation.

Board Designing:

  • Board size and shape creation.

  • Component placements.

  • PCB Routing: 2 to 16 Layer routing.

  • Plane creation.

  • Design rule checking.

  • Gerber generation.

Skills you gain after the course completion:

  • Basic Electronics and Electronic components expertise.

  • Circuit Designing (Power management circuit designing)

  • Circuit Simulation for best understanding of the subject.

  • Tools/Software Expertise.

  • Basic design module practice up to 4-Layers.

  • Advanced design module practice up to 16-Layers.

  • Design expertise:

    o Assignments consists single and double sided PCB.

    o Assignments consists 2-Layers to 16-Layers design.

  • Library Module:

    o Symbol and Footprint design for all types of packages.

  • High speed placements & routing techniques.

  • Power integrity and Signal Integrity analysis.

  • Design for Manufacturing, Testing and Fabrication expertise.

  • Gerber generation and editing.

Benefits of choosing PCB Design Course:

  • Strong hold in basic electronics.

  • Circuit Design capability.

  • Circuit analysis & ERC.

  • Components knowledge.

  • Power Supply designing.

  • Power Integrity Analysis.

  • Multiple PCB-CAD tool expertise.

  • Expert in library creation.

  • Multi-layer PCB designing.

  • Signal Integrity Analysis.

  • High speed PCB designing.

  • Gerber creation & editing.

Manufacturing Process – Becoming an Injection Molding Pro

Learn how plastic products are made with injection molding process

Created by Amardeep Singh - Product Designer and Trainer


Students: 917, Price: $19.99

Students: 917, Price:  Paid

This course will teach you the Injection Molding process. Although basics such as applications, advantages & disadvanatges, materials are taught but main focus is on industrial process, cad considerations and defects.

This course is specifically for those who are new to molding process. To make sure that you feel like live class is going on. We have also included interview questionnare so that you are able to answer questions related to injection molding process.

Introduction to Manufacturing Process

1.To analyze and understand the metal cutting phenomenon 2.To select process parameter and tools for obtaining desired

Created by Milind Rohidas Bahiram - Basic Manufacturing Engineering


Students: 792, Price: Free

Students: 792, Price:  Free

Manufacturing is the production of goods through the use of labor, machines, tools, and chemical or biological processing or formulation. It is the essence of secondary sector of the economy.[1] The term may refer to a range of human activity, from handicraft to high-tech, but it is most commonly applied to industrial design, in which raw materials from the primary sector are transformed into finished goods on a large scale. Such goods may be sold to other manufacturers for the production of other more complex products (such as aircraft, household appliances, furniture, sports equipment or automobiles), or distributed via the tertiary industry to end users and consumers (usually through wholesalers, who in turn sell to retailers, who then sell them to individual customers).

Manufacturing engineering, or the manufacturing process, are the steps through which raw materials are transformed into a final product. The manufacturing process begins with the product design, and materials specification from which the product is made. These materials are then modified through manufacturing processes to become the required part.

Modern manufacturing includes all intermediate processes required in the production and integration of a product's components. Some industries, such as semiconductor and steel manufacturers, use the term fabrication instead.

The manufacturing sector is closely connected with the engineering and industrial design. Examples of major manufacturers in North America include General Motors Corporation, General Electric, Procter & Gamble, General Dynamics, Boeing, Pfizer, Precision Castparts, and Fiat Chrysler Automobiles. Examples in Europe include Volkswagen Group, Siemens, BASF and Michelin. Examples in Asia include Toyota, Yamaha, Panasonic, LG, Samsung and Tata Motors.

Manufacturing process selection and Design for manufacturing

Learn about the basics of selecting process for a mechanical design and the principles of design for Manufacturing

Created by Mufaddal Rasheed - Mechanical engineer , Inventor and Quora Top Writer


Students: 545, Price: $74.99

Students: 545, Price:  Paid

Design for manufacturing or DFM is a very important practical activity in Mechanical design engineering.

Converting concept  into designs which can be manufactured and ready for implementation is a key skill in product development.

This course attempts to cover the basics of designing for manufacturing including selecting a suitable process based on various criteria and designing for the process to reduce cost and improve ease of manufacturing .

Topics covered are

  1. Importance of Process selection

  2. Parameters and Criteria for selection

  3. Comparison of processes

  4. Process- Shape matrix

  5. Section wall thickness and Tolerance ranges

  6. Cost associated

  7. Part complexity and part cost

  8. Prototyping vs production

  9. Case studies in process selection

  10. Designing for Forging - principles and guidelines

  11. Designing for Casting - principles and guidelines

  12. Design for Injection Molding  - Principles and guidelines.

  13. Exercises to practice

The learning outcome of this course is to develop a strong basic comparative understanding of various processes and get started with designing as per certain processes to build DFM skills for mechanical design & product development.

Course will be best suitable for  Mechanical design engineers who want to level up their DFM knowledge and skills .

How to manufacture products in China

A practical course that will help you design, source, manufacture and import a product from China

Created by Elyse Daniels - Expert in manufacturing products in China


Students: 495, Price: $89.99

Students: 495, Price:  Paid

Have you got a brilliant idea for a product that you strongly believe should exist in the World but don't have the knowledge of how to manufacture the product? If the answer is yes, then this course is for you!

Most people have heard a horror story about the risks of manufacturing a product in China. While I myself have had challenges I strongly believe this is because there were no courses or experts I could go to for advice. One of the motivations behind creating this course was to help people avoid making the mistakes that I have.

This course is extremely practical with at least one activity in each section so that as you are learning you are also taking the necessary steps required to getting your product made.

Packaging material manufacturing

Manufacturing of Food Packaging material and their testing

Created by Asmita Thorat - Asst. Prof. at K.K. Wagh College of Food Technology Nashik


Students: 358, Price: Free

Students: 358, Price:  Free


Introduction to subject, Packaging situations in World and India Need of packaging, plastic consumption/use in World, India etc. Package requirements, package functions Hazards acting on package during transportation, Storage and atmospheric package, labeling laws

Package Materials: classification packages, paper as package material its manufacture, types, advantages corrugated and paper board boxes etc. Glass as package material, Manufacture, Advantages, disadvantages. Metal as package material-manufacture, Advantages, disadvantages Aluminum as package material, its

advantages and disadvantages, plastic as package material classification of polymers, Properties of each plastics, uses of each plastics, chemistry of each plastic such as polyethylene, Polypropylene, polystyrene, polycarbonate, PVC, PVDC, Cellulose acetate, Nylon etc.

Lamination, Coating and Aseptic packaging, Lamination, need of lamination, types, properties, advantages & disadvantages of each type. Coating on paper & films, types of coatings. Need of coating, methods of coatings. Biodegradable and edible packaging, Aseptic packaging-Need, Advantages, process, comparison of conventional & aseptic packaging. System of aseptic packaging and materials used in aseptic packaging, Machineries used in Packing foods. Permeability – theoretical consideration, permeability of gases and vapours. Permeability of multilayer packages, permeability in relation to products.

Packaging of Specific Foods with its properties like bread, biscuits coffee, milk powder, egg powder, carbonated beverages Snack foods etc, Mechanical and functional tests on package, Various mechanical functional testes perform in laboratories on package boxes and package materials.


Identification of Packaging Materials; Measurement of Thickness of Packaging Films, papers and boards; Measurement of water absorption of paper, paper boards; Measurement of bursting strength of paper and paperboard; Measurement Tear resistance of papers; Measurement of puncture resistance of paper and paperboard; Measurement of tensile strength of paper of paper boards; Determination of gas transmission rate of package films; Determination of WVTR of films; Determination of coating on package materials; Identification of plastic films; Prepackaging practices followed for packing fruits and vegetables.

Insights of Petrochemical Industry

Manufacturing of Petrochemical compounds

Created by Sandip Nivrutti Derle - Teacher


Students: 349, Price: Free

Students: 349, Price:  Free

This course is mainly about the manufacturing process of petrochemical Industry compounds. This course will beneficial to Diploma and Engineering students of chemical engineering and allied engineering branches. The Principle Raw Materials for petrochemical compound s manufacturing are:

1. Natural gas(largely methane)

2. Liquefied Petroleum gas (LPG) which are easily extracted from natural gas, contains propane and butane which can be easily cracked to olefin

3. Refinery Off- Gases from catalytic and reforming operations

4. Hydroforming of petrochemical stocks which produces benzene, toluene, and xylene (BTX), give a large quantity of hydrogen

5. Naphtha and Fuel oil which is used to make synthesis gas by catalytic cracking. It also provides starting material such as ethylene, acetylene, and propylene by steam cracking.

6. Petroleum coke which is a source of carbon for calcium carbide and acetylene

Petrochemical compounds are mainly classified based on starting Material Such as C1 Compounds, C2 Compounds, C3 Compounds, C3 Compounds, C4 Compounds, and Aromatic Compounds. C1 compounds manufacture from methane or synthesis gas, C2 compounds produce from ethylene and/or acetylene, C3 compounds produce from propylene, C4 compounds from Butene and butane, Aromatic compounds from Benzene, toluene, and xylene. These raw materials contain one or several predominant hydrocarbons which can be separated so that compound is synthesized as follows

Chemicals from C1 compounds- Methanol, Formaldehyde, Chloromethanes

Chemicals from C2 compounds- Ethylene Dichloride, Vinyl Chloride

Chemical from C3 compounds- Acetone, Isopropanol, Cumene

Chemicals from Aromatic compounds- Phenol, Styrene

Supply Chain mistakes to avoid in a Manufacturing Industry

Learn from the costly supply chain mistakes of Sourcing, Manufacturing, Warehousing, Technology and Customer Experience

Created by Gopalakrishnan Veilumuthusamy - Founder and CEO of Global Operational Excellence Solutions


Students: 335, Price: $49.99

Students: 335, Price:  Paid

The course is designed to help you learn from the supply chain mistakes of Manufacturing Industries so that you avoid them in your supply chain. This course gains its significance especially during this Post Covid-19 era, with another global recession around the corner. Whether you are a Student or an Early Career professional with fundamental Supply Chain knowledge, hunting for a Supply chain job during these tough times, or a working professional trying to improve your supply chain, this course is for you. We don't cover the supply chain basics in this course. We directly jump into the Supply chain mistakes in Manufacturing Industries and things to do in the Post Covid-19 world. This course will be helpful to you in preparing for your next job interview for a SCM role and to grow in your Career by contributing to your supply chain by using these ideas. Focus of this course is on manufacturing supply chain. The course has five modules:

1. Sourcing Mistakes

2. Manufacturing Mistakes

3. Distribution and Warehousing Mistakes

4. Customer Experience Mistakes

5. Technology Mistakes.

I am sure you would find this course worth the time and money spent. Also preview my video on Thoughts and Motivational Quotes to overcome slowdown, given at the end of the course. Every challenge is an Opportunity. Happy learning everyone.

Manufacturing Process – Become a Forging Pro!

Learn how components used at point of load/stress are designed and manufactured with no prior experience in Engineering

Created by Amardeep Singh - Product Designer and Trainer


Students: 314, Price: $19.99

Students: 314, Price:  Paid

This course gives you an overview of the industrial forging process. How the process is done in industry and what are the considerations you need to keep in mind while doing the die design.The Course is divided into 5 sections

1. Forging: This section is about the forging, its industrial application and benefits.

2. Forging Operations: This section is about commonly used forging operations in industry.

3. Forging Types: Here all the different types are discussed. Forging based on temperature, based on die arrangement and based on equipment used as well as their sub types are discussed.

4. CAD Considerations: This section teaches you the considerations to be kept in mind  while designing the part and forging die.

5. Industrial Process: Final section is about the industrial process. We will take the example of industrial part and will look at the steps right from the material procurement stage to product packing dispatch stage.

Selection of Belts from Manufactures Catalogue

Introduction: Basics of Belt drives, Selection of Flat belts and 'V' belts from Manufactures Catalogue

Created by Dr. Prashant Kushare - Design Engineer


Students: 293, Price: Free

Students: 293, Price:  Free

This course discusses the Basics of Belt drives, Selection of Flat belts and V belts from Manufactures Catalogue. In basics of belt drives, belt classifications and important terms associated with belt drives including belt length for open as well as cross belt drive, power transmitting capacity, condition for maximum power transmitting capacity, initial tension, centrifugal tension in belt drive, limiting tension ratios for flat and V belts are presented and discussed. The effect of centrifugal tension on power transmitting capacity of the belt drive is also discussed. It would help for the selection of belt drives. In this course, parameters required for the selection of flat belt drive and V belt drive also presented and explained. In procedure of selection of flat belts and V belts, significance of different factors such as load correction factor, correction factor and arc of contact factor for service are discussed. In these course, two cases of selection of flat belt and v belt drive from manufactures catalogue is also explained in a lucid manner. The belt specification for Hi- speed belting and Fort belting is also explained. This course will be beneficial to the engineering students and working engineers for the selection of belts required for specific applications.

Additive Manufacturing & Design of 3D Pr. with Cura in Hindi

Learn 3D Printing & Additive Manufacturing Technology, Fused Disposition Modeling, SLS, SLM, Cura Slicing Software

Created by Naman kumar Gandhi - Professor at Indore Institute of Science & Technology


Students: 292, Price: $19.99

Students: 292, Price:  Paid

Imagine if you could press "print" and then everything you'd ever need would be created. I mean EVERYTHING. Well, this isn't science fiction completely.. it's almost 100% possible thanks to 3D Printing.

3D Printing, or additive manufacturing, is a way to build real objects using a three dimensional electronic robot/device based off using 3D CAD models (computer aided drafting). The technology is still in early stages but it's quickly becoming the best way for anyone to make prototypes and cool objects that wouldn't have been possible ever before.

Learn how to prototype products and even create functional objects for your home, office, or even as unique gifts for friends.

Additive manufacturing (AM) as known as 3D printing, is a technology that reached the consumers market in recent years and started to be used in application on the individual and industry levels. Although the additive manufacturing technologies are expanding rapidly and carry a lot of potential for future advancement, each methodology followed has its own ups and downs. This course will cover additive manufacturing processes, the advantages and limitations of these processes, and the approaches to be used in considering the material properties and design for additive manufacturing. The applications of additive manufacturing will be covered, such as those in the aerospace and health care tools. Taking this course will empower you to design your own 3D models in a systematic way for various engineering application by learning the software and hardware of the additive manufacturing implementation. This Course will also covers types of additive manufacturing along with Slicing software Cura training in details.

This course will help you understand how 3D printing is being applied across a number of domains, including design, manufacturing, and retailing. It will also demonstrate the special capabilities of 3D printing such as customization, self-assembly, and the ability to print complex objects. In addition to business applications, this course will also examine how individuals, including those in developing countries, are using this technology to create solutions to the problems they face. This course will also provide an overview of design thinking and how you can use this framework to develop ideas that can be turned into objects. Learners who complete this course will obtain a rich understanding of the capabilities of 3D printing and how to think about designing objects for this new technology.

Learn 3D printing (Additive Manufacturing)

a simplified explanation for understanding and creating 3D printed objects

Created by Dr. Rauf Tailony - Ph.D. in Mechanical Engineering


Students: 291, Price: $19.99

Students: 291, Price:  Paid

Additive manufacturing (AM) as known as 3D printing, is a technology that reached the consumers market in recent years and started to be used in application on the individual and industry levels. Although the additive manufacturing technologies are expanding rapidly and carry a lot of potential for future advancement, each methodology followed has its own ups and downs. This class will cover additive manufacturing processes, the advantages and limitations of these processes, and the approaches to be used in considering the material properties and design for additive manufacturing. The applications of additive manufacturing will be covered, such as those in the aerospace and health care tools. Taking this course will empower you to design your own 3D models in a systematic way for various engineering application by learning the software and hardware of the additive manufacturing implementation.

Rapid Prototyping or Additive Manufacturing

Layer by layer manufacturing

Created by Sandip Baburao Gunjal - Online tutor


Students: 178, Price: Free

Students: 178, Price:  Free

In this age of fast growth (rapid technology age), customer demands are increasing rapidly. Customers do not like to wait. The traditional processing time needs to be shortened. It is a ‘Buyers market’ today, instead of a ‘Sellers market’ as it used to be in the past. The traditional method involves time loss on concept designing, manufacturing, assembly and testing. For example, in case of a foundry, lot of time is spent on pattern designing, making, getting the casting done and then evaluating its performance. This initially involves designing and redesigning, until a satisfactory product is developed, which is a very slow process. In order to get this time recovered, to overcome the slow trend and grow up with the requirements of the next generation, the most logical answer to the future of design and manufacturing is the Rapid Prototyping Technology (RPT). Rapid prototyping (RP) is a technology wherein the physical modeling of a design is done using a specialized machining technology. Rapid prototyping (RP) is used to generate the product directly from the 3D CAD model data. Using an additive approach for building shapes, the systems in RP join different materials like liquids or powder to form some physical objects. In this course you will learn the basics of Additive Manufacturing or Rapid Prototyping (RP), various steps in RP, applications of RP and different methods of RP.

Fundamentals of Manufacturing for an ERP


Created by EBodhisathva Solutions - Make It Happen


Students: 150, Price: $89.99

Students: 150, Price:  Paid

Fundamentals of Manufacturing for an ERP is a Course released 26th November 2020, aimed at freshers aspiring to learn and Fundamentals of Manufacturing Functions.

In typical manufacturing organization you may be directly part of manufacturing the Products of your organization. Or you may be dealing with Manufacturing unit while performing functions such as Sales, Marketing, Procurement, Planning, Design, Accounting, Finance, Store keeping and Services. In all your dealings you might be wondering on some of the terms and practices that you might be hearing in the conversations with your Manufacturing counterparts.

You as a Store keeper deal with issuing materials and may realize certain material are issued as a set because they are all used to make certain product. At times, you will be seeing alternative items issued in place of the items in the Material list against the work order for which you are issuing the material. At times, you see some material are not immediately requested even if they are in the Material list of Work order. This is probably because they are needed only in later steps of manufacturing. You will pick a few things about manufacturing and miss many.

As a Sales person you will be wondering why an order for big quantity from customer can not be fulfilled at the given dates. Why cant this order be still taken and fulfil by engaging more people to complete on time. You will be disappointed for the delay of Cash Flow when the Planner or Plant manager firmly confirm the order of such size can be delivered only at a later date. You may really want to know what are those constraints which can not let the Production Plant deliver the order on the date you wanted even with adding man power.

Even as a Lathe Machine expert in the Manufacturing Department, you might be wondering on many aspects on what is impact of your work on the end product and why certain scheduling actions on your piece of work, are not clear to you.

This kind of "missing knowledge" or "gaps of knowledge" is quite common for all interfacing functions of Manufacturing, as well as the function Manufacturing itself. Every one of you know a little bit on Manufacturing not all the basics. If any of you want to pick up Manufacturing as your add-on Skill or full time career, you may first want to get to the basics.

Any career aspirant a new comer from the college or a non-manufacturing SME want to get in to Manufacturing domain, the basics will be the starting point. And basics are the foundation based on which you grow.

eBodhisathva Solution made the course with above kind of professionals and starters.

This course is fully focused on explaining the very fundamentals of Manufacturing, with detailed illustrations where possible.

The examples used in the Course are not very usual examples that you may see from public information. Lot of effort is spent to include more realistic and close to real examples in the Organization.

To make the explanation very appealing, lot of graphics and animations are applied appropriately.

The aspirants of ERP career, IT consultants, Professionals in other domains of Manufacturing industry and Engineering students may take this as a starting point before going in depth to specialized topics within Manufacturing.

The Course is structured as below:

  1. Introduction to Manufacturing

  2. Bill of Material (Enhanced on 1st Dec)

  3. Routing (Enhanced in Jan 2021)

  4. Types of Manufacturing

  5. Discrete Job Shop

  6. Repetitive Manufacturing

  7. Assemble to Order Manufacturing

  8. Project Manufacturing

  9. Process Manufacturing

  10. Just in Time (JIT) - eBook on JIT added in Jan 2021

  • The Course has supporting Off-line reading material in the form of eBooks for most of the topics covered.

  • The Course included exercises for Practical understanding of the concepts, wherever applicable.

  • The Course is associated Quizs for students to refresh their understanding during attending course

This course will be Continuously refined according to the feedback received. The enhancements will be included in the course for no extra-cost for the students already enrolled as well as for new students.

The audience are requested to make a note that the course will be a bit slow keeping the target audience (Novices)in view. Any in-depth understanding needs further efforts on top of attending this course.

Electronics – PCB101- PCB Design & Manufacturing

Electronics - PCB101- Circuit Board, PCB designer soft skills development with PCB manufacturing understanding

Created by Ata Syed - Canadian PCB Engineer / Mater Kebob Roll Destroyer


Students: 133, Price: $19.99

Students: 133, Price:  Paid

Develop your PCB design skills with a deep understanding of the PCB manufacturing industry

With my 20+ years of PCB manufacturing experience, I will teach you things that would have taken you years to learn at your job.

This course is designed for new graduates and new engineers so the topics are explained in a simple manner to the audience. The course covers lots of information and topics which would help you become a good designer. The skills beyond your software abilities.

What You Will Learn:

  • Different types of PCBs

  • File formats used in PCB industry

  • PCB materials and stack-ups

  • Design Rule Checks

  • Design for Manufacturing


  • Soldermask and Silkscreen

  • Array and Panelization

  • How to reduce the cost of your PCB

  • Understanding PCB Supplier capabilities

  • How to find a good PCB supplier

  • Quality in PCB

  • Careers in PCB industry (PCB design, PCB manufacturing, PCB assembly)

What to expect after finishing this course:

  • You will have a better understanding of how PCB design and PCB manufacturing related to each other and how they affect each other.

  • You will have a better understanding of career opportunities in different PCB fields.

  • Somewhat understanding of how to read material data sheets

YouTube Chanel

Follow my YouTube channel "ElektroLynx" to take advantage of watching free videos related to this course. Videos cover topics like:

  • Why are PCBs always Green ??

  • What is the best Gerber Viewing software?

  • How to load drill files correctly?

  • PCB & PCBA Glossary videos

ElektroLynx website
ElektroLynx is my hobby website, not a company. On the website, you will find many articles related to the PCB industry. I will upload articles on regular basis. The website is fairly new therefore you may not see many articles right away. The site also has a blog section as well Forums. In the forums section, please feel free to ask and discuss any topic related to PCB.


All future courses (PCB102, PCB201, and PCB202) will be offered as complementary (Free of Charge) to all of our PCB101 students.


  • 26-Jan-2021 - Course released

  • 30-Jan-2021 - English captions added

  • 16-Mar-2021- Signal Integrity

  • 17-Mar-2021 - Free Software reference for "Saturn Tool Kit"

  • 22-Mar-2021 - PCB Design section created